|
 |
Suspension Assembly Number |
Cup
Dia. In. (mm) |
A in. (mm) |
B in. (mm) |
C in. (mm) |
D in. (mm) |
E in. (mm) |
Beam
Size in. (mm) |
Weight lb. (kg) |
Capacity lb. (kg) |
Vacuum
Pad Assembly Number |
| PS95S-NBR200 | 10.00 (254) |
14.82 (376) |
6.86 (174) |
1.71 (43) |
4.42 (112) |
8.52 (216) |
2.00 (51) |
7.50 (3.4) |
250 (113) |
VC95R-4 |
| * | The
cup capacities shown above are based on 24"Hg at sea level with a safety factor
of two (2) in the horizontal (flat), and four (4) in the vertical (upright).
Vertical Load Capacity is half of the listed Horizontal Load Capacities
above. Rated Load Capacities are estimated; actual capacity will vary based on the load surface and the level of vacuum. |
For Assembly with Silicone Pad, use part number PS95S-SI200
| ||||||||