| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
View Printer-Friendly PDF Page
 |
Product |
ANVER
and P-Series |
Connection Thread Size |
Fitting |
Notes | |||
|
|
 |
BF3-OR |
10-32 (5 mm) male |
Electro-Less |
The BF3-OR allows you to screw directly into any of the SLSA-1 Suspensions which are 5 mm female. Featuring an improved barb design, it comes with a captured O-ring for a vacuum tight seal. A popular fitting for the North American market. |
|||
|
|
 |
BF3-SHEX |
10-32 (5 mm) male |
Electro-Less |
The BF3-SHEX allows you to screw directly into any of the SLSA-1 Suspensions which are 5 mm female. A popular fitting for the North American market. |
|||
|
|
BM10-32 |
10-32 UNF male |
Electro-Less |
The 10-32 Fitting UNF Male allows you to screw directly into any of the SLSA-1 Suspensions which are 5 mm female. Fits all the same cups as the 10-15 Fitting, but in a 10-32 UNF version. Comes with a captured O-ring for a vacuum tight seal. A popular fitting for the North American market. |
||||
 |
BM5 FITTING M5 MALE Replaces 10-15 FITTING A-3107030 31.07.030 01AC |
5
mm male |
Electro-Less |
The BM5 FITTING M5 MALE is an improved 5 mm male fitting with captured O-ring which replaces the older 10-15 FITTING M5 MALE. It allows you to screw directly into any of the SLSA-1 Suspensions. |
||||
| - | Product Photo | Part No. | Connection |
Material |
Notes | |||
 |
A-3150196 |
5
mm female |
G
1/8" male |
Black Anodized Aluminum |
|
|||
|
||||||||
 |
STRENGTHENING
A-0101084 |
N/A |
Silicone |
The Strengthening Ring 20/30 is used with the above 20-30 Fitting. It simply stretches on and snaps in place. Included with cups which use the one-piece fitting. |
||||
 |
A-3150141 |
5
mm female |
G
1/8" male |
Black Anodized Aluminum |
|
|||
|
||||||||
 |
A-3150163 |
N/A |
- |
The 20-30 Filter Screen is used with 3-piece fitting for 20-30 Series cups and with the above 20-30 Connection Plate. Protects the vacuum system from incoming debris. |
||||
| - | Product Photo | Part No. | Connection |
|
Notes | |||
 |
A-3150140 |
N/A |
Aluminum |
The 20-30 Locking Spacer is used with the above 20-30 Connection Plate. It presses in from the bottom. |
||||
 |
A-3150055 |
N/A |
Aluminum |
The 30 Button Valve is used in multiple cup applications. If a single cup does not contact the load, that cup's valve will not open, causing no loss of vacuum while the other cups pick up the load. |
||||
 |
A-3250001 |
G
1/8" female |
Black Anodized Aluminum |
The 40/30-2/BL30 Fitting uses a Strengthening Ring 40. It allows you to screw directly into any of the SLSA-2 Suspensions which have a male G 1/8" thread. |
||||
 |
STRENGTHENING
A-0101085 |
N/A |
Silicone |
The Strengthening Ring 40 is used with the above 40/30-2/BL30 Fitting. It simply stretches on and snaps in place. Included with cups which use the one-piece fitting. |
||||
| - | Product Photo | Part No. | Connection |
|
Notes | |||
 |
A-3150056 |
N/A |
Aluminum |
The 40 Button Valve is used in multiple cup applications. If a single cup does not contact the load, that cup's valve will not open, causing no loss of vacuum while the other cups pick up the load. |
||||
 |
A-3150143 |
G
1/8" female |
Black Anodized Aluminum |
The 40 Connection Plate uses a 40 Locking Spacer. It allows you to screw directly into any of the SLSA-2 Suspensions which have a male G 1/8" thread. |
||||
 |
A-3150164 |
N/A |
- |
The 40 Filter Screen is used with 3-piece fitting for 40 Series suction cups and with the above 40 Connection Plate. Protects the vacuum system from incoming debris. |
||||
 |
A-3150142 |
N/A |
Aluminum |
The 40 Locking Spacer is used with the above 40 Connection Plate. It presses in from the bottom. |
||||
| - | Product Photo | Part No. | Connection |
|
Notes | |||
 |
50/50-2 FITTING |
G
1/8" female |
Black Anodized Aluminum |
The 50/50-2 Fitting is utilized with a Strengthening Ring 50. It allows you to screw directly into any of the SLSA-2 Suspensions which have a male G 1/8" thread. |
||||
 |
STRENGTHENING
A-0101086 |
N/A |
Silicone |
The Strengthening Ring 50 is used with the above 50/50-2 Fitting. It simply stretches on and snaps in place. Included with cups which use the one-piece fitting. |
||||
 |
A-3150057 |
N/A |
Aluminum |
The 50 Button Valve is used in multiple cup applications. If a single cup does not contact the load, that cup's valve will not open, causing no loss of vacuum while the other cups pick up the load. |
||||
 |
A-3150145 |
G
1/8" female |
Black Anodized Aluminum |
The 50 Connection Plate uses a 50 Locking Spacer. It allows you to screw directly into any of the SLSA-2 Suspensions which have a male G 1/8" thread. |
||||
| - | Product Photo | Part No. | Connection |
|
Notes | |||
 |
A-3150165 |
N/A |
- |
The 50 Filter Screen is used with 3-piece fitting for 50 Series suction cups and with the above 50 Connection Plate. Protects the vacuum system from incoming debris. |
||||
 |
A-3150144 |
N/A |
Aluminum |
The 50 Locking Spacer is used with the above 50 Connection Plate. It presses in from the bottom. |
||||
 |
A-3350033 |
N/A |
Aluminum |
The 75 Button Valve is used in multiple cup applications. If a single cup does not contact the load, that cup's valve will not open, causing no loss of vacuum while the other cups pick up the load. |
||||
 |
A-3150043 |
N/A |
Aluminum |
The 75 Connection Plate 1/8 is to be imbedded in the 75 Series suction cup's rubber portion allowing the 75 Fitting 1/8" to be held in place. |
||||
| - | Product Photo | Part No. | Connection |
|
Notes | |||
 |
A-3250006 |
G
1/8" female |
Black Anodized Aluminum |
The 75 Fitting 1/8" with 1/8" female center port connection with optional M5 (10/32) female port often used as a blow-off port. |
||||
 |
A-3150215 |
N/A |
- |
The 75 Filter Screen is used with 3-piece fitting for 75 Series suction cups and with the above 75 Fitting 1/8". Protects the vacuum system from incoming debris. |
||||
 |
A-3250007 |
G
1/2" female |
Black Anodized Aluminum |
The 110 Fitting 1/2" with 1/2" female center port connection with optional NPSF 1/8" female port often used as a blow-off port. |
||||
 |
A-3150044 |
N/A |
Aluminum |
The 110 Connection Plate is to be imbedded in the 110 Series suction cup's rubber portion allowing the 110 Fitting 1/2" to be held in place. |
||||
| - | Product Photo | Part No. | Connection |
|
Notes | |||
 |
A-3150167 |
N/A |
- |
The 110/150 Filter Screen is used with 3-piece fitting for 110 Series suction cups with the 110 Fitting 1/2" or 150 Series suction cups with the 150 Fitting 1/2". Protects the vacuum system from incoming debris. |
||||
 |
A-3350034 |
N/A |
Aluminum |
The 110/150 Button Valve is used in multiple cup applications. If a single cup does not contact the load, that cup's valve will not open, causing no loss of vacuum while the other cups pick up the load. |
||||
 |
A-3150045 |
N/A |
Aluminum |
The 150 Connection Plate is to be imbedded in the 150 Series suction cup's rubber portion allowing the 150 Fitting 1/2" to be held in place. |
||||
 |
A-3250008 |
G
1/2" female |
Black Anodized Aluminum |
The 150 Fitting 1/2" with 1/2" female center port connection with optional NPSF 1/8" female port often used as a blow-off port. |
||||
 |
The "G" thread is also known as BSPP, commonly used world-wide for Vacuum Applications. |
| ||||||||