|
 |
 |
Specifications for VC Series Vacuum Cups:
 |
Vacuum Cup No. and Material** |
A Dia. in. (mm) |
A' Dia. in. (mm) |
B Rim Width in. (mm) |
F Height in. (mm) |
C Flex in. (mm) |
Vacuum Port |
H* Bolt Size |
J Bolt Circle in. (mm) |
*Rated
Load (Horizontal) lb. (kg) |
Cup
Weight lb. (kg) |
Suspension Assembly Number |
|
VC95Q-GR (Andurasoft) |
9.75 (248) |
10.00 (254) |
2.13 (54) |
1.55 (39) |
0.66 (17) |
3/8" NPT | 5/16-18 UNC |
4.5 (114) |
250 (113) |
2.75 (1.25) |
Info to Come |
| *The
cup capacities shown above are based on 24"Hg at sea level with a safety factor
of two (2) in the horizontal (flat), and four (4) in the vertical (upright).
Vertical Load Capacity is half of the listed Horizontal Load Capacities
above. **Special order item , may be subject to minimum purchase depending on available stock at time of order. Rated Load Capacities are estimated; actual capacity will vary based on the load surface and the level of vacuum. |
| ||||||||