 |
|
|
|
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
ANVER OC55 Series Oval Vacuum Cups consist of a natural rubber
seal bonded to a long lasting aluminum hub. OC55 Series vacuum cups are
commonly used for handling paper, cardboard cartons and wood, but are suitable
for almost any vacuum handling application such as glass. The color of the seal is
orange. These cups have a nice lip design and work well. Note: The actual suction cup width when pressed down under load is just under 2 1/2" ( 64 mm) in width. Mounting: The vacuum cups come un-drilled and un-tapped with two locating holes only. These holes come sealed with rubber and can be used as a center or side vacuum port. If you drill through for mounting holes, make sure to seal the threads with a semi-hardening sealant. Vacuum Cup Materials:
|
Specifications for OC55 Series Oval Vacuum Cups:
|
|
Product Photo (Click to Enlarge) |
Vacuum
Cup |
A* in. (mm) |
B* in. (mm) |
C in. (mm) |
D in. (mm) |
E in. (mm) |
F in. (mm) |
G in. (mm) |
H in. (mm) |
h in. (mm) |
Rated
Load** (Vertical) lb (kg) |
Rated
Load** (Horizontal) lb (kg) |
 |
OC55-100NR |
3.9 (100) |
2.2 (55) |
1.0 (25) |
3.1 (78) |
1.3 (33) |
0.3 (8) |
0.3 (8) |
0.9 (22) |
0.35 (9) |
15 (7) |
30 (14) |
|
 |
OC55-150NR |
5.9 (150) |
2.2 (55) |
1.6 (40) |
5.0 (128) |
1.3 (33) |
0.3 (8) |
0.3 (8) |
0.9 (22) |
0.35 (9) |
22 (10) |
45 (20) |
|
 |
OC55-200NR |
7.9 (200) |
2.2 (55) |
2.0 (50) |
7.0 (178) |
1.3 (33) |
0.3 (8) |
0.3 (8) |
0.9 (22) |
0.35 (9) |
30 (13) |
60 (27) |
|
 |
OC55-300NR |
11.8 (300) |
2.2 (55) |
3.9 (100) |
10.9 (278) |
1.3 (33) |
0.3 (8) |
0.3 (8) |
0.8 (21) |
0.30 (8) |
50 (22) |
100 (45) |
* Note: "A" and "B" dimensions
given are when cup is flared under vacuum.
** The cup capacities shown above
are based on 24"Hg at sea level with a safety factor of two (2) in the
horizontal (flat),
and four (4) in the vertical (upright).
Rated Load Capacities are
estimated; actual capacity will vary based on the load surface and the level of
vacuum.
 |
 |
| More Information | ||
 ATL20M4-MR-SP using OC55-300 Vacuum Pads |
 |
 |
Return to Main Oval Vacuum Cup Page
| ||||||||
View Printer-Friendly PDF Page
