|
 Vacuum
Cups and Suction Cups
Vacuum Cup
Fittings - Group 1
Barbed Fittings which Push-In from the Top
for ANVER Universal Group 1 Suction Cups
View Printer-Friendly PDF Page
|
|
-
ANVER divides
small universal vacuum suction cups into three groups based on mounting
specifications and style. The Group 1 Fittings shown here are simple
barbed fittings that push in from the top of the cup.
-
Within each
vacuum fitting group, the hardware is interchangeable with all other
cups within the group. Any Group 1 fitting will fit any Group 1 cup. It
may also fit other cups with similarly sized holes in the cups’ centers.
Contact the factory to verify suitability.
-
These all-metal,
electro-less nickel-plated brass fittings are reusable. Once you buy the
cups with fittings you only need to buy replacement rubber cups in the
future.
-
The cup is
simply pressed onto the end of the barbed fitting to hold tight.
Replacement takes only a few seconds, and does not require unscrewing
the fitting.
-
These specific cup fittings are top
quality, production grade fittings made by ANVER Corp. in the USA.
|
Group 1 Vacuum Cup
Fittings:
|
 |
Product
Photo
(Click to Enlarge) |
Vacuum Fitting
Part No. |
Connection
Thread Size |
Thru Hole
Diameter
or Thread
in.
(mm) |
Hex Size
in.
(mm) |
L
Height Added
to Assembly
in.
(mm) |
H
Height
in.
(mm) |
Weight
(In Grams) |
BM5,
BM10-32,
BM6,
B18M,
B18M-G
B18F,
B18F-G |
|
 |
 |
The BM5 5 mm barbed fitting w/ Captured
O-Ring screws
onto the SLSA-1 suspensions |
| BM5 |
M5
(5 mm)
male |
0.09
(2.3) |
0.31
(8) |
0.20
(5) |
0.35
(9.0) |
2.9
Grams |
|
|
 |
The BM10-32
barbed
fitting w/ Captured O-Ring
can screw into 10-32 UNF or 5 mm female |
|
BM10-32 |
10-32
UNF
male |
0.10
(2.5) |
0.31
(8) |
0.20
(5) |
0.35
(9.0) |
2.8
Grams |
|
|
 |
The BM6 6mm barbed
fitting w/ Captured O-Ring can
screw into any 6 mm female fitting or mounting |
| BM6 |
M6
(6 mm)
male |
0.13
(3.4) |
0.38
(9.5) |
0.20
(5) |
0.39
(10.0) |
3.5
Grams |
|
- |
Product Photo |
Part No. |
Connection |
Thru Hole |
Hex Size |
Added Height |
Overall Height |
Weight |
|
|
 |
The B18F-G Barbed
fitting is a G1/8"
female thread and allows you to screw into the SLSA-2
Suspensions |
B18F-G |
G1/8"
female |
0.13
(3.6) |
0.55
(14) |
0.47
(12) |
- |
4.1
Grams |
|
|
|
The B18F Barbed
fitting is a 1/8"
female NPT thread |
B18F |
1/8"
NPT
female |
0.17
(4.2) |
0.5
(12.6) |
0.47
(12) |
- |
8.1
Grams |
|
|
 |
The B18M
Barbed
fitting is a 1/8" male NPT with
a 10-32 UNF inside thread |
|
B18M |
1/8"
NPT
male |
10-32
UNF
female |
0.17
(4.2) |
0.5
(12.6) |
0.21
(5.2) |
0.51
(13.0) |
9.9
Grams |
|
|
 |
The B18M-G
Barbed
fitting is a G1/8" male with a
5 mm female inside thread |
|
B18M-G |
G1/8"
male |
M5
(5 mm)
female |
0.14
(3.5) |
0.55
(14) |
0.24
(6) |
0.53
(13.5) |
12.0
Grams |
 |
The "G" thread is also
known as BSPP, commonly used world-wide for Vacuum Applications. |
Note:
5 mm and 10-32 Male screws right into 5 mm Female fittings.
Other Adapter Fittings
for Other Connections:
Female-to-Female
Adapters |
Female-to-Male
Adapters |
Male-to-Male
Adapters |
Group 2 Vacuum
Cup Fittings |
Group 3 Vacuum
Cup Fittings |
 |
 |
 |
 |
 |
Vacuum Cups that use
Push-In Style
Group 1 Vacuum Cup Fittings:
| Flat
Suction Cups
|
Single
Bellows Suction Cups
|
Double
Bellows Suction Cups
|
F5-,
F10-, F15-, F20-, F25-
|
B1.5-5-,
B1.5-11-, B1.5-14--, B1.5-16-, B1.5-20-, B1.5-20-, B1.5-22-, B1.5-25-
|
B2.5-5-,
B2.5-7-, B2.5-9-, B2.5-14-, B2.5-18-, B2.5-20-, B2.5-25-
|
|
|
|
|
