site map

ANVER Vacuum Cups, Vacuum Lifters, Vacuum Pumps, Vacuum Tube Lifters, Vacuum Sheet and Plate Lifters, Vacuum End-EffectorsANVER Vacuum Cups and Suction Cups
Vacuum Cups with Center Suspension and Side Vacuum Port
Part Number: VC119-2

Vacuum Cup
No.
and Material

A
Dia.
in.
(mm)

A'
Dia.
in.
(mm)

C
Flex
in.
(mm)

 E
Port

F
Height
in.
(mm)

G
Flat
in.
(mm)

H
Suspension
Port

*Rated Load
(Horizontal)
lb
(kg)

Weight
lb
(kg)

 Suspension
Assembly
VC119-2
 (Nitrile)		 12.25
(311)		 12.50
(318)		 0.50
(13)		 3/8" NPT 2.50
(64)		 2.75
(70)		 3/4-10 UNC 500
(227)		 5.44
(2.47)
PS119R-NBR
Series
* The cup capacities shown above are based on 24"Hg at sea level with a safety factor of two (2) in the horizontal (flat), and four (4) in the vertical (upright). Vertical Load Capacity is half of the listed Horizontal Load Capacities above.
Rated Load Capacities are estimated; actual capacity will vary based on the load surface and the level of vacuum.

Click Here to See More Details of Different Suction Cup and Vacuum Cup Materials

 

ANVER Corp.,  36 Parmenter Rd,  Hudson, MA  01749  USA  -  Tel: 800-654-3500  -  +1-978-568-0221  -  Fax: +1-978-568-1570
Home: www.anver.com    email:

Copyright © ANVER Corp. 2012

Terms of use