 |
|
|
|
|
| Pad Number (Material) [Drawing No.] |
Replacement Seal Number |
Internal Seal Number |
A Pad Dia. in. (mm) |
Mounting Bolt Pattern L X W in. (mm) |
C in. (mm) |
D in. (mm) |
Vacuum Port NPT |
H Mounting |
Weight lb (kg) |
*Rated
Load lb (kg) |
| VP145Q (Nitrile) [76200845] |
SR-145DP** | SE-145 | 14.50 (368) |
6.5
X 4.0 (165 X 102) |
0.81 (21) |
2.94 (75) |
1/2" | 3/4-10 UNC | 29 (13) |
750 (341) |
| SR-145M** | Not Needed with SR-145M |
14.50 (368) |
6.5
X 4.0 (165 X 102) |
0.46 (12) |
2.46 (62) |
1/2" | 3/4-10 UNC | 29 (13) |
750 (341) |
*Note: Rated load capacity at 24" Hg vacuum when used in the horizontal plane, and based on a safety factor of 2. Divide again by 2 for vertical applications. Actual capacity depends on load surface and condition of the vacuum generating system, and must be determined by the user.
** Note: Replacement seal SR-145M does not require an internal seal. When replacing seals for VP145Q Pads on a lifter, all seals must be replaced with matching seals.
 |
 |
| ||||||||
