site map

ANVER Vacuum Pumps, Vacuum Genrators, Vacuum StationsElectric Powered Vacuum Pumps and Vacuum Stations
Mini-Vacuum Stations
 EP Series

EP1001

These low cost, compact electric-powered vacuum stations require little maintenance. A vacuum check valve is provided to maintain vacuum in case of power failure. On clean, smooth, non-porous material, the unit will hold vacuum per ASME Standard B30.20a-2001 for Vacuum Lifting Devices allowing the operator to put down the load safely. A vacuum attach/release valve is included to ensure a consistent attach/release.

Features a quality ANVER electric vacuum pump and a vacuum gauge to monitor vacuum level. Continuously running vacuum pump makes this vacuum station perform well on slightly porous material. An internal vacuum filter with replaceable element protects against contamination.
Specification Drawing for EP1001 Mini-Vacuum Station

Specifications for ANVER EP Series Mini Vacuum Generators

Model 
Number

Vacuum Pump
Model Number

Supply
Voltage

Vacuum
Flow
SCFM

 H.P.

Maximum
Vacuum
in. Hg
(mm Hg)

Weight
lbs.
(kg)
EP1001-02 PMP-2.0-116 115V-60-1
(3.0 Amps)		 2.0 1/3 24
(610)		 40
(18)
EP1001-04 PMP-4.3HP-116 115V-60-1
(4.0 Amps)		 4.3 1/2 24
(610)		 44
(20)

ANVER Corp.,  36 Parmenter Rd,  Hudson, MA  01749  USA  -  Tel: 800-654-3500  -  +1-978-568-0221  -  Fax: +1-978-568-1570
Home: www.anver.com    email:

Copyright © ANVER Corp. 2012

Terms of use