| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
View Printer-Friendly PDF Page|
|
ANVER Flow-Through Silencers avoid clogging by passing debris directly through the silencer. Each silencer is tuned in proportion to its exhaust flow and contains a dense felt liner to absorb exhaust noise minimizing the excess noise to a gentle, low frequency flow of air. This flow-through design allows debris to easily pass through the silencer. Making them perfect for venturi pumps that are prone to ingesting dirt and debris. |
Specifications:
| Standard Materials: | Anodized AL - 6061 black, polyurethane foam |
 |
| Maximum Temperature: | 176°F (80°C) | |
| Maximum Operating Pressure: | 150 PSI | |
|
Color: |
Black |
|
|
|
||
|
|
Product
Photo |
Part Number |
A |
B |
D1 |
D2 in. (mm) |
D3 |
Weight oz. (g) |
|
|
 |
0.31 |
2.75 |
G 1/8 |
0.19 (5) |
0.75 |
0.6 (17) |
|
|
|
 |
0.31 |
2.75 |
G 1/4 |
0.27 (7) |
0.98 |
0.9 (25) |
|
|
|
 |
FTS-0.375 |
0.43 (11) |
2.75 (70) |
G 3/8 | 0.43 (11) |
0.94 (24) |
1.2 (34) |
|
|
 |
FTS-0.500 |
0.51 (13) |
2.95 (75) |
G 1/2 | 0.51 (13) |
1.65 (42) |
1.6 (45) |
| - | Product Photo | Part No. | A | B | D1 | D2 | D3 | Weight |
|
|
 |
FTS-0.750S |
0.59 (15) |
2.95 (75) |
G 3/4 | 0.71 (18) |
1.65 (42) |
2.5 (71) |
 |
FTS-1.00 |
0.59 (15) |
6.30 (160) |
G1" |
.98 (25) |
2.24 (57) |
- | |
|
|
 |
FTS-1.5 |
0.69 (17.5) |
6.3 (160) |
G 1-1/2 | 1.32 (33.5) |
2.24 (57) |
7.6 (215) |
 |
The "G" thread is also known as BSPP, commonly used world-wide for Vacuum Applications. |
| ||||||||