Compressed
Air Powered Vacuum Generators
Self-Contained Air
Powered
Vacuum Stations
VPF-57
AIR Series
ANVER’s latest models of vacuum generators feature
high capacity pumps, valves, filters and gauges for trouble-free operation in
the most demanding production environments. Designed for use with a wide
assortment of vacuum lifter assemblies and interchangeable pad attachments.
These high quality Vac-Packs are ruggedly built, yet affordably priced for
unmatched value. The VPF-57 AIR Series features a sturdy welded frame
construction for heavy weight load lifting capability.
Features:
Air Powered Vacuum Generator No electric power required, operates using dry, clean compressed air
for vacuum generation. The vacuum generator is a single stage unit with
no moving parts or rubber gaskets to maintain or replace.
Front Mounted Gauges Includes both an input air pressure and vacuum indicator gauges,
front mounted for continuous monitoring by the operator. Also included
is a filter view port to monitor filter for cleaning.
Ergonomic Adjustable Front Handlebar Easy to grasp, large loop handlebar enables the operator to easily
and safely maneuver the attached load without touching the load itself.
Handlebar can be adjusted for smaller loads.
Slide Control Valve with Standard
Safety Interlock The slide valve assembly allows vacuum attach and release and is
mounted to the front handlebar for convenient access by the operator.
The standard safety interlock is to keep the slide valve in the attach
position while lifting a load to prevent accidental load release.
Vacuum Check Valve and Reservoir A check valve and a vacuum reservoir help to maintain vacuum if the
supply of compressed air is interrupted, for safe handling of non-porous
loads.
Takes Standard Dry, Clean Shop Air Input Pressure to be regulated to 72.5 psi. Provided with 1/4” NPT
input air supply connector and shut-off slide valve.
Vacuum Leakage Sensing System (VLS-08
& VLS-08-20) The VLS-08 (Series) are battery powered units consisting of solid
state circuitry with microprocessor, pressure sensor, LCD digital
display in inches of Hg, warning audible horn and red light. System is
plumbed to the Vac-Pack and monitors vacuum level triggering the alarm
in the event of a loss in vacuum level (10% loss for VLS-08 / 20% loss
for VLS-08-20).
Maintenance:
Air Filter High capacity air filter provides protection against pump damage. It
is mounted behind the front cover which has a view port for routine
inspection.
General:
Frame Construction The VPF-57-AIR Series has a fully welded frame with a vacuum
reservoir and a lifting bale and beam mounting hardware.
• Standard for 3”x3” beam [9” hardware centers] with a structural
lifting capacity rating up to 2,200 lbs (998 kg).
• Heavy Duty for 3”x6” beam [9” hardware centers] and reinforced lifting
bale with a structural lifting capacity rating up to 4,400 lbs (1,996
kg).
Versatility For
larger load lifting capability or alternate power requirements, ANVER
offers electric powered and self-powered mechanical vacuum generators,
all with standard mounting designs for interchangeability.
Options:
Optional Moisture Trap (WT-PF)
For damp applications: prevents moisture saturation of filter and possible
damage to pump. Not for handling wet loads.
