Self-Powered Mechanical Vacuum Lifters
Completely Self-Powered
and Self-Cycling Vacuum Generators
Mechanical Vacuum Generators
ANVER Self-Powered Mechanical Vacuum Lifters can be
outfitted with a variety of Interchangeable Vacuum Pads and Vacuum
Attachments for a wide range of material handling applications. Various
single and multiple pad configurations can be installed on most of our
standard vacuum generators.
Unique Features
Instant
attach and release is provided via the hoist up and down movement. The
attach and release alternates each lift cycle for fast, efficient
handling. Mechanical vacuum lifters increase the speed and efficiency of
the horizontal handling of sheet and plate, panels, and all types of
nonporous materials.
Simple to operate. One person can control the entire operation. No
oil fumes or noise pollution.
Easy to Maintain. Only the highest quality components and superior
construction are used with few moving parts.
Pivoting crossarms and vacuum cups are fully adjustable to fit a
variety of sheet sizes.
Non-marking vacuum suction cups with bottom springs for even
attachment. Top springs provide even loading when lifting.
Ball-in-socket articulated suspensions permit handling wavy or blocked
plate.
Extremely Safe. Load cannot be released until it is set down on a
surface.
ANVER Mechanical Vacuum Lifters are suitable for 100% duty cycle 24
hour a day operation. They never overheat or burn out.
Each vacuum suction cup supports an equal
amount of the load weight with less than 2 inches (51 mm) of sag or
droop.
Easy to Maintain and Keep Operating in Heavy Production
Environments. ANVER
SSR Snap-In Sealing Rings are used to allow for cup replacement in
seconds without tools. No wires or hose to tangle up in the hoist chain;
no fuses, motors or switches to replace. ANVER Mechanical Vacuum Lifters
cannot overheat and are not affected by electric power brownouts.
ANVER Vacuum Lifters comply fully with and meet the standards of US
ANSI ASME Standard B30.20 for below-the-hook lifting devices, as well as
complying with OSHA and European requirements.
Click here
for more information on Vacuum Lifting Device Safety Standards.
