Electric Powered Vacuum Generators
Self-Contained Electric Vacuum Stations
VPF-57-AC Series

ANVER’s latest models of vacuum generators feature high capacity pumps, valves, filters and gauges for trouble-free operation in the most demanding production environments. Designed for use with a wide assortment of vacuum lifter assemblies and interchangeable pad attachments. These high quality Vac-Packs are ruggedly built, yet affordably priced for unmatched value. The VPF-57-AC features a sturdy welded frame construction for heavy weight load lifting capability.

Features:

• Front Mounted Controls and Gauges
  Vacuum gauge is mounted on front cover for continuous monitoring by operator. The power switch includes built-in circuit breaker. Also included is a filter view port to monitor filter for cleaning.
• Ergonomic Adjustable Front Handlebar
  Easy to grasp, large loop handlebar enables the operator to easily and safely maneuver the attached load without touching the load itself. Handlebar can be adjusted for smaller size loads.
• Slide Control Valve with Standard Safety Interlock
  The slide valve assembly allows vacuum attach and release and is mounted to the front handlebar for convenient access by the operator. The standard safety interlock is to keep the slide valve in the attach position while lifting a load to prevent accidental load release.
• Vacuum Check Valve and Reservoir
  A check valve with vacuum reservoir helps to maintain vacuum if electrical power is interrupted, for safe handling of non-porous loads.
• Twistlock Power Cord Plug and Receptical
  Both Twistlock plug and receptical are provided to prevent accidental power cord separation.
• Vacuum Leakage Sensing System (VLS-07 & VLS-07-20)
  The VLS-07 (Series) are battery powered units consisting of solid state circuitry with microprocessor, pressure sensor, LCD digital display in inches of Hg, warning audible horn and red light. System is plumbed to the Vac-Pack and monitors vacuum level triggering the alarm in the event of a loss in vacuum level (10% loss for VLS-07 / 20% loss for VLS-07-20).

Maintenance:

• Oil-Less Dry Piston Vacuum Pump Motor
  Powerful ½ horsepower motor drives a high-performance 4.3 CFM dry piston vacuum pump.
• Air Filter
  High capacity air filter provides protection against pump damage. It is mounted behind the front cover which has a view port for routine inspection.

General:

• Vacuum Pump Description
  High-performance oil-less dry piston pump has a ½ hp motor capable of generating 4.3 cfm. Motor is thermally protected and is rated for 100% duty cycle.
• Frame Construction
  The VPF-57-AC Series has a fully welded frame with a vacuum reservoir and a lifting bale and beam mounting hardware.
  • Standard for 3”x3” beam [9” hardware centers] with a structural lifting capacity rating up to 2,200 lbs (998 kg).
  • Heavy Duty for 3”x6” beam [9” hardware centers] and reinforced lifting bale with a structural lifting capacity rating up to 4,400 lbs (1,996 kg).
• Versatility
  For larger load lifting capability or alternate power requirements, ANVER offers electric powered and self-powered mechanical vacuum generators, all with standard mounting designs for interchangeability.

Options:

• Optional Moisture Trap (WT-PF)
  For damp applications: prevents moisture saturation of filter and possible damage to pump. Not for handling wet loads.

Vac-Pack Series
(Click for Specification Sheet)

L
in.
(mm)

W
in.
 (mm)

H
in.
 (mm)

VPF-57-AC
Standard

34.63
(879)

17.13
(435)

17.94
(456)

VPF-57-AC
Heavy Duty

34.63
(879)

17.13
(435)

19.75
(502)

Click Here, to view examples of vacuum lifter frames for remote generators.

Click here for information on 
selecting the right vacuum lifter

Vacuum Pad Attachments

ANVER Corp.,  36 Parmenter Rd,  Hudson, MA  01749  USA  -  Tel: 800-654-3500  -  978-568-0221  -  Fax: 978-568-1570

Copyright © ANVER Corp. 2008

Terms of use