Tall Frame

ANVER’s latest models of vacuum generators feature high capacity pumps, valves, filters and gauges for trouble-free operation in the most demanding production environments. These light weight entry level units are designed for use with a wide assortment of vacuum lifter assemblies and interchangeable pad attachments. The VPFL4-AIR Series features a sturdy welded frame construction and are ruggedly built, yet affordably priced for unmatched value.

Features:

• Air Powered Vacuum Generator
  No electric power required, operates using dry, clean compressed air for vacuum generation. The vacuum generator incorporating a single stage venturi with no moving parts or rubber gaskets to maintain or replace.
• Front Mounted Vacuum Gauge
  Includes a vacuum indicator gauge, front mounted for continuous monitoring by the operator.
• Ergonomic Adjustable Front Handlebar
  Easy to grasp, large loop handlebar enables the operator to easily and safely maneuver the attached load without touching the load itself. Handlebar can be adjusted for smaller loads.
• Slide Control Valve with Standard Safety Lock
  The slide valve assembly allows vacuum attach and release and is mounted to the front handlebar for convenient access by the operator. The standard safety lock is to keep the slide valve in the attach position while lifting a load to prevent accidental load release.
• Vacuum Check Valve and Reservoir
  A check valve and a vacuum reservoir help to maintain vacuum if the supply of compressed air is interrupted, for safe handling of non-porous loads.
• Takes Standard Dry, Clean Shop Air
  Input Pressure to be regulated to 72.5 psi. Provided with 1/4” NPT input air supply connector and shut-off slide valve.
• Vacuum Leakage Sensing System (VLS-08 & VLS-08-20)
  The VLS-08 (Series) are battery powered units consisting of solid state circuitry with microprocessor, pressure sensor, LCD digital display in inches of Hg, warning audible horn and red light. System is plumbed to the Vac-Pack and monitors vacuum level triggering the alarm in the event of a loss in vacuum level (10% loss for VLS-08 / 20% loss for VLS-08-20).
• Air Filter
  High capacity air filter provides protection against venturi damage. A clear filter bowl to monitor filter for inspection and cleaning.
• Quick Disconnect Coupling Socket Vacuum Port
  All VPFL4 Air Series Generators are provided as standard with quick disconnect coupling socket for interchangeability of pad attachments or lifting frame assemblies. [Note: a quick disconnect coupling plug (P/N: QDP-38F-B) must be provided on pad attachment or lifting frames. Contact ANVER for information to suit application specifications.]

General:

• Standard Frame Construction (Low Headroom or Tall)
  The VPFL4 Series has a fully welded frame with a vacuum reservoir and structural lifting capacity* rating of 2,200 lb. (998 kg) for 3” sq. beams with beam mounting hardware.
• Versatility
  For larger load lifting capability or alternate power requirements, ANVER offers electric powered and self-powered mechanical vacuum generators, all with standard mounting designs for interchangeability.

Click here for information on 
selecting the right vacuum lifter

Vacuum Pad Attachments

ANVER Corp.,  36 Parmenter Rd,  Hudson, MA  01749  USA  -  Tel: 800-654-3500  -  +1-978-568-0221  -  Fax: +1-978-568-1570

Copyright © ANVER Corp. 2010

Terms of use