ANVER Vacuum Tube Lifters, Vacuum Lifters,Vacuum Sheet and Plate Lifters, Vacuum End-EffectorsVacuum Tube Lifting Systems
Optional Features
CA - Compressed Air Assist Option

PDF for Selecting the Right Tube Lifter View Printer-Friendly PDF Page

ANVER VT Vacuum Tube Lifters can be supplied with an internal compressed air line to provide an auxiliary source of power to the tube lifter control head. When connected to a source of clean, dry compressed air with a recommended maximum of 90 psi, the air line outlet at the tube lifter control head provides pneumatic power that can be used to assist in load handling by powering vacuum head attachments such as venturi vacuum generators, pneumatic rotators and tilters, or to actuate a valve to close off vacuum flow to the vacuum pads and assist in releasing loads in high stacking applications.

Shown above is a VT160 Vacuum Tube Lifter equipped with the CA Compressed Air Option, Extended Length Handle, and VT-RLV-S Release/Lift Assist Valve for High Carton Stacking. Compressed air powers the release and lift assist valve, allowing the cartons to be easily released when the lift tube is in its nearly fully compressed state.

The CA Compressed Air Assist option, available for all VT Vacuum Tube Lifters, must be incorporated in the assembly at time of order and is not available in kit form as an add-on. For ordering purposes, simply add -CA to the end of the Top Swivel, Control Head and Tube Assembly numbers found in the Lift Tube Assemblies and Parts Chart. Custom and standard vacuum lifting attachments are available from our extensive inventory of vacuum attachments for boxes and cartons, bags and sacks, sheet, coils and rolls. Contact the factory or your ANVER dealer for further product information.

 

The internally coiled air line is rotary coupled to the tube lifter top swivel to provide full, unimpeded 360° rotation of the lift tube. The air outlet port is compactly located on the left side of the tube lifter control head. The internal air line, with no exposed lines between the top swivel inlet and control head outlet ports, permits unimpeded operation of the vacuum tube lifter with no adverse effects on the tube lifter's operation or lifting performance.

 

Contact ANVER for help in choosing the appropriate tube lift system for your requirements.

Replacement parts are available from stock. Call us and see why our quality, service and prices set the standard in the industry.

ANVER Corp.,  36 Parmenter Rd,  Hudson, MA  01749  USA  -  Tel: 800-654-3500  -  978-568-0221  -  Fax: 978-568-1570

Home: www.anver.com    email:

Copyright © ANVER Corp. 2008

Terms of use