• The 360° bottom swivel assembly, made of 304 stainless steel, allows full rotation of the load under the vacuum tube lifter control head. This allows the attached load to be precisely spun into position while keeping the control head in front of the operator.

• Allows for easier and more precise positioning of loads. Commonly used when unloading pallet loads of boxes to a skid with different orientations.

• Designed to offer easy rotation with just enough drag so that the load does not just keep spinning.

Bottom Swivel Assembly Dimensional Specifications:

	Product Photo (Click to Enlarge)	Part No.	A in. (mm)	B in. (mm)	For Use with VT Systems:
		VT-SW-M	3.15 (80)	1.8 (45)
		VT-SW-S	4.72 (120)	1.3 (33)

• ANVER's Stainless Steel Universal Swivels are used to save wear and tear to the vacuum lifting tubes while handling somewhat unbalanced loads.

• The universal swivel ensures that the load's weight hangs directly under the center of the vacuum lift tube, extending the lift tube life.
• Quality construction using heavy gauge stainless steel with all wear points using nylon bearing sleeves.  The swivel comes with four mounting holes of which two will fit most other vacuum tube lifters on the market.

Swivel
Part No.

A
in.
(mm)

B
in.
(mm)

For Use with VT
Systems:

VT-UAS-M

3.15
(80)

4.75
(121)

VT-UAS-S

4.72
(120)

5.75
(146)

ANVER Corp.,  36 Parmenter Rd,  Hudson, MA  01749  USA  -  Tel: 800-654-3500  -  +1-978-568-0221  -  Fax: +1-978-568-1570

Copyright © ANVER Corp. 2012

Terms of use